nvidia-smi -pl POWER
This will probably not work with recent driver versions, but might work with 525.
nvidia-smi -pl POWER
This will probably not work with recent driver versions, but might work with 525.
It works when set up with flatseal.
Especially on laptops, where VRAM is halved in comparison to desktop models for whatever reason.
I thought compression would not help much with disk space as well. I believe it depends on the use case. After switching to btrfs and enabling zstd compression, my Arch install reduced from 100GB to 60 GB in terms of used disk space. Most of the savings are from documentations of development packages.
On my headphones, you can either use LDAC with one device or SBC/AAC with two devices. I can only change it via the app. Is there a similar setting for you?
Any way to see which bitrate is currently being used? I know you can set it to use only 909kbps, 606kbps or 303kbps in the wireplumber config, but I am curious which bitrate the adaptive mode (usually) uses.
Also, if cpu draws too much power, you will not get the dynamic power boost. Try to limit your cpu wattage. The dynamic boost is up to 15W, depending on how much power the rest of your system uses.